data brief SII9187B hdmi port processor data brief document # sii-db-1071-a02
SII9187B hdmi port processor data brief silicon image, inc. ii ? 2009-2010 silicon image, inc. all rights reserved. sii-db-1071-a02 september 2010 copyright notice co pyright ? 2009-2010 silicon image, inc. all rights rese rved. these materials contain proprietary and confidential information (including trade secrets, copyright, and other interests) of silicon image, inc. you may not use these materials except only for your bona fide non-commercial evaluation of your potential purchase of products and/or services from silicon image or its affiliates, and/or only in connection with your purchase of products and/or services from silicon image or its affiliates, and only in accordance with the terms and conditions herein. you have no right to copy, modify, transfer, sublicense, publicly display, create derivative works of or distribute these materials, or otherwise make these materials available, in whol e or in part, to any third party. trademark acknowledgment silico n image?, vastlane?, steelvine?, pinnaclear?, simplay?, simplay hd?, satalink, instaport?, tmds?, and liquidhd? are trademarks or registered trademarks of silicon image, in c. in the united states and other countries. hdmi ? , the hdmi logo and high-definition multimedia interface? are trademarks or register ed trademarks of, and are used under license from, hdmi licensing, llc. x.v.color? is a trademark of sony corporation. export controlled document thi s document contains information subject to the export administration regulations (ear) and has a classification of ear99 or is controlled for anti-terrorism (at) purposes. tran sfer of this information by any means to an ear country group e:1 or foreign national thereof (whether in the u.s. or abroad) may require an export license or other approval from the u.s. department of commerce. for more inform ation, contact the silicon image director of global trade compliance. further information to request other materials, detailed hardware and software gui des, and additional information, contact your local silicon image, inc. sales office or visit th e silicon image, inc. web site at www.siliconimage.com . information about obtaining licenses required for using hdmi and hdcp technologies is available from www.hdmi.org and www.digital-cp.com . ? 2009-2010 silicon image, inc. all rights reserved.
SII9187B hdmi port processor data brief . sii-db-1071-a02 ? 2009-2010 silicon image, inc. all rights reserved. 1 introduction the SII9187B hdmi port pr ocessor is the second generation of hdmi ? devices that support the hdmi specification. with four hdmi inputs and a single output, the SII9187B port processor enhances the functionality of digital tvs using single system on a chip (soc) solutio ns with integrated hdmi receivers. the port processor provides a simple, low-cost method of retransmitting digital audio and video to give consumers a truly all-digital experience. built-in backward compatibility with dvi 1.0 allows hdmi systems to connect to any dvi 1.0 source. features the SII9187B device brings cutting edge innovations, such as: ? enhanced cable equalization for long cable support, even at deep color resolutions that enables the SII9187B device to work with noisy signals and many sources, making the sink devices highly interoperable ? integrated edid and cec functions ? improved esd protection on all signals connected to the hdmi connector. hdmi inputs and output ? four hdmi input ports and single output port ? hdmi, hdcp, and dvi compatibility ? tmds ? cores run at 25?225 mhz ? supports video resolutions up to 1080p, 60 hz, 12- bit or 720p/1080i, 120 hz, 12-bit. control capability ? consumer electronics control (cec) interface incorporates an hdmi-compliant cec i/o and an integrated cec programming interface (cpi); these simplify design and lower cost and software overhead ? integrated edid and ddc support for 4 hdmi/dvi ports and 1 vga port with a 256-byte nvram shared between ports that loads into separate 256-byte sram for each of 5 ports ? individual control of hot plug detect (hpd) for each of the 4 hdmi/dvi ports ? tpwr (tmds clock detect) output to help speed soft mute of audio while plugging and unplugging cables ? controllable by the local i 2 c bus. power management ? flexible power management provides extremely low standby power consumption ? standby power can be supplied from a separate +3.3 v or 5 v standby power pin ? port power only can be used to read edid ? single power 3.3-v source ? integrated 5 v to 3.3 v voltage regulator. package ? 72-pin, 10 mm x 10 mm, 0.5 mm pitch qfn package with enhanced epad?. figure 1. typical application of SII9187B hdmi port processor
SII9187B hdmi port processor data brief silicon image, inc. 2 ? 2009-2010 silicon image, inc. all rights reserved. sii-db-1071-a02 pin diagram figure 2 shows the pin diagram for the SII9187B port processor. pin names are generalized by type for this document. the list below the diagram describes the purpose of each type. figure 2. pin diag ram (top view)
SII9187B hdmi port processor data brief silicon image, inc. sii-db-1071-a02 ? 2009-2010 silicon image, inc. all rights reserved. 3 package information epad requirements the SII9187B hdmi port processor is packaged in a 72-pin 10 mm x 10 mm qfn package with an exposedpad? (epad) that is used for the electrical ground of the chip and for improved th ermal transfer charact eristics. the epad dimensions are 4.7 mm x 4.7 mm with a tolerance of 0.15 mm. soldering the epad to the ground plane of the pcb is required to meet package power dissipation requirements at full speed operation and to conn ect the chip circuitry to electrical ground. a clearance of at least 0.25 mm should be designed on the pcb between the edge of the epad and the inner edges of the lead pads to avoid electrical shorts. the thermal land area on the pcb can us e thermal vias to improve heat remova l from the package. these thermal vias can double as ground connections, attaching internally in the pcb to the ground plane. an array of vias can be designed into the pcb beneath the package. for optimum thermal pe rformance, silicon image recommends that the via diameter be 12 to 13 mils (0.30 to 0.33 mm) and the via barrel be plated with 1-ounce copper to plug the via. this plating helps avoid solder wicking inside the via during the soldering proce ss, which can result in voids in solder between the exposed pad and the thermal land. if the copper plating does not plug the vias, the thermal vias can be tented with solder mask on the top surface of the pcb to avoid solder wicking inside the via during assembly. the solder mask diameter should be at least 4 mils (0.1 mm) larger than the via diameter. package stand-off is also a consideration. for a nominal stand-off of approximately 0.1 mm the stencil thickness of 5 to 8 mils should provide a good solder joint between the epad and the thermal land. figure 3 on the next page shows the package dimensions of the SII9187B package.
SII9187B hdmi port processor data brief silicon image, inc. 4 ? 2009-2010 silicon image, inc. all rights reserved. sii-db-1071-a02 package dimensions these drawings ar e not to scale. 0.10 c b figure 3. package diagram jedec package code mo-220 item description min typ max item description min typ max a thickness ? 0.85 0.90 d2 epad size 4.55 4.70 4.85 a1 stand-off 0.00 0.01 0.05 e2 epad size 4.55 4.70 4.85 a2 body thickness ? 0.65 0.70 b plated lead width 0.18 0.23 0.30 a3 base thickness 0.20 ref e lead pitch 0.50 bsc d footprint 10.00 bsc k epad-to-pin clearance 0.20 ? ? e footprint 10.00 bsc l lead foot length 0.30 0.40 0.50 d1 body size 9.75 bsc lead foot angle ? ? 14 e1 body size 9.75 bsc
SII9187B hdmi port processor data brief silicon image, inc. sii-db-1071-a02 ? 2009-2010 silicon image, inc. all rights reserved. 5 marking specification this drawing is not to scale. figure 4. marking diagram ordering information production part numbers: device part number standard SII9187Bcnu the universal package may be used in lead-free and ordinary process lines. SII9187Bcnu llllll.ll-l yyww xxxxxxx logo silicon im age part number lot # (= job#) date code trace code pin 1 location product designation si i xxxxrpppp-sxxxx package type revision special designation speed product line
SII9187B hdmi port processor data brief silicon image, inc. 6 ? 2009-2010 silicon image, inc. all rights reserved. sii-db-1071-a02 disclaimers these materials are provided on an ?as is? basis. silicon imag e, inc. and its affiliates disclaim all representations and warranties (express, implied, statutory or otherwise), including but not limited to: (i) all implied warranties of merchantability, fitness for a par ticular purpose, and/or non-infringement of third party rights; (ii) all warranties arising out of course-of-dealing, usage, and/or trade; and (iii) all warranties that the information or results provided in, or that may be obtained from use of, the materials are accurate, re liable, complete, up-to-date, or produce specific outcomes. silicon image, inc. and its affiliates assume no liability or resp onsibility for any errors or omissions in these materials, makes no commitment or warranty to correct any such errors or omissions or update or keep current the information contained in these materials, and expressly disclaims all dir ect, indirect, special, incidental, consequential, reliance and punitive damages, including without limitation any lo ss of profits arising out of your access to, use or interpretation of, or actions taken or not take n based on the content of these materials. silicon image, inc. and its affiliates reserve the right, withou t notice, to periodically modify the information in these materials, and to add to, delete, and/or change any of this information. notwithstanding the foregoing, these materials shall not, in the absence of authorization under u.s. and local law and regulations, as required, be used by or exported or re-exported to (i) any u.s. sanctioned or embargoed country, or to nationals or residents of such countries; or (ii) any pers on, entity, organization or other party identified on the u.s. department of commerce's denied persons or entity list, the u.s. department of treasury's specially designated nationals or blocked persons list, or the department of state's debarred parties list, as published and revised from time to time; (iii) any party engaged in nuclear, chemical/bio logical weapons or missile proliferation activities; or (iv) any party for use in the design, development, or production of rocket systems or unmanned air vehicles. products and services th e products and services described in these materials, an d any other information, services, designs, know-how and/or products provided by silicon image, inc. and/or its affiliates ar e provided on as ?as is? basis, except to the extent that silicon image, inc. and/or its affiliates provides an app licable written limited warranty in its standard form license agreements, standard terms and conditions of sale and servi ce or its other applicable standard form agreements, in which case such limited warranty shall apply and shall govern in lieu of all other warranties (express, statutory, or implied). except for such limited warranty, silicon image, inc. and its affiliates disclaim all representations and warranties (express, implied, statutory or otherwise), regarding the information, services, designs, know-how and products provided by silicon image, inc. and/or its affiliates, including but not limited to, all implied warranties of merchantability, fitness for a particular purpose, and/or non- infringement of third party rights. you acknowledge and agree that such information, services, designs, know-how and products have not been designed, tested, or manufactured for use or resale in systems where the failure, malfunction, or any inaccuracy of these items carries a risk of death or serious bodily injury, in cluding, but not limi ted to, use in nuclea r facilities, aircraft navigation or communication, emergency systems, or other systems with a similar degree of potential hazard. no person is authorized to make any other warranty or representation concerning the performance of the information, products, know- how, designs or services other than as provided in these terms and conditions. 1060 e. arques avenue sunnyvale, ca 94085 t 408.616.4000 f 408.830.9530 www.siliconimage.com
|
